After discussing this with the foundry, one method that I would like to propose using would be to cast blocks of plaster on a set of stainless steel legs (using stainless steel legs ensures that they can withstand the heat of the casting). The plaster can be carved into the chosen shape or form to become a former for the wax. I would be working the wax directly onto the surface of the plaster in various weaving styles, the legs in the plaster allows the plaster block to be retained in the air, thus preventing the weight of the plaster crushing the wax. Once the weaving is complete the entire weave, plaster former and legs would go through the lost wax casting technique. Once the molten bronze is poured and cooled the foundry would cut a small section of the weaving to remove the plaster and legs, then the section of woven bronze would be replaced and welded back into place.
Removing problems of inflatables will open up many avenues for styles of cast work in a way that is non restrictive. This could lead into new fluid forms that are delicate, weaves would not have to be thick and they could have open areas. I can explore the internal space of a piece and expand into the exploration of negative and positive space. The possibilities are endless once the technical restrictions of an inflatable or cartable former are solved.
Watch this space for developments …..